Stock # E05650

Landpride RCF2084 Rotary Cutters

Dealer Price $8,825 CAD

RCF2084 Rotary Cutters

The Land Pride smooth-top RCF2084 Rotary Cutter will quickly tackle pastures and light brush with its 84" cutting width and 2" cutting capacity. The floating top link permits the deck to follow the terrain for an even cut. This cutter has a Category I and II 3-Point hitch that is Quick Hitch adaptable. The standard ASAE Category 4 driveline is offered with 2-plate slip-clutch to protect your cutter investment.

Available Models: RCF2084
 Features and Benefits
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 4 driveline with 2-plate slip-clutch
Slip-clutch driveline offers convenience for continual work.
Dual position clevis type 3-Point floating top link Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck & side skirt construction Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
11 15/16" Deck Height Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" x 27" Oval stump jumper Standard Oval stump jumper slides over stumps, rocks and debris.
High blade tip speed Ensures clean cut.
15" Laminated tailwheel Laminated material is long lasting in rough conditions. Can’t go flat.
1 1/4" Heavy-duty spindle on tailwheel Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Front Guarding Protect against flying debris. Customer can choose to include single chain or rubber guarding.
Optional Rear Guarding Protect against flying debris. Rear Metal Band is standard. Customer can choose to include single chain guarding.
Driveline Holder Keeps driveline up out of dirt. Easier hook up of driveline. Quick-Hitch Compatible

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects. Gearbox Warranty

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance. 2" Cutting Capacity

These cutters offers 2" cutting capacity. See Operator's Manual for more information. Floating Top Link

Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors. 10 Gauge Stump Jumper

Standard round stump jumper slides over stumps, rocks, and debris.
 Specifications & Capacities

Machine Weight

Single Tailwheel

Dual Tailwheel


1,047 lbs. with Front Rubber Guard and Rear Metal Band.

1,155 lbs. with Front Rubber Guard and Rear Metal Band.

Hitch Category l & II with floating top linkage, Quick Hitch ready
Cutting Width 84"
Overall Width 89"

Overall Length

Singe Tailwheel

Dual Tailwheel


133 1/4"


Deck Height (Bottom of Deck to Bottom of Skid Shoe) 11 15/16"
Cutting Height 1 1/2" to 12"
Cutting Capacity 2" Diameter
Recommended tractor hp 45-90 hp
Power take-off speed 540 rpm
Gearbox Ratio 1:1.44
Gearbox Construction Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft
Gearbox Oil Capacity & Type 7 Pints of EP 80-90W oil
Deck Construction All welded deck
Deck Material Thickness 10 Gauge (.134")
Side Skirt Material Thickness 10 Gauge (.134")

Skid Shoes                         Standard


Full length weld-on skid shoes

1/4" x 2 1/2" x 18 7/16" Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes)

Stump Jumper 3/16" x 27" Oval Pan with 1" thick blade holder bar
Blades (2) 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
Blade Bolts Keyed with harden flat washers & locknuts.
Blade Tip  Speed 17,113 FPM
Driveline ASAE Category 4
Driveline Protection 2 Plate slip clutch
Tailwheel Mount Welded A-arm and caster fork with 360 degree swivel
Tailwheel 4" x 8" x 15" Laminated tire with cast iron hub

Front Guard                          Optional


Rubber Belting

Single Chain Guard

Rear Guard                          Standard


Metal Band

Single Chain Guard

Sale Type
Hitch Types
Cat. 1 & 2
Machine Widths
Horsepower Required
45-90 HP