2026 KUBOTA BV5160SC14

SuperCut-14

• Reliable cutting device
  • 15.75” Rotor
  • diameter
    • 14 Strong full guided double tines
    • Knives controlled from tractor cab
    • 2.75” Theoretical chop length
  • High capacity in all conditions
    • The crop is forced into the chamber through the knives
    • Instant bale start in all the conditions
  • Perfect cutting quality
    • Hardened knives
    • Each knife individually spring protected
    • Automatic knife re-engagement

DropFloor

• Easy to use technology
  • Operate directly from tractor cab
  • Single acting valve needed
• Fast and efficient rotor un-blocking device
  • Fast & easy to use system
    • Select ‘Drop floor’ on Focus control box
    • Operate tractor valve to lower floor and re-engage PTO
    • Operate tractor valve to close floor and start baling again
• A safe system to remove a blockage
  • Huge clearance between floor and rotor
  • 100% efficient blockage clearance

• High capacity – Perfect raking
  • Small diameter pick-up
  • 81.5” working width
  • 73.6” Tine to tine
  • 2.36” Tine spacing
  • 5 Rows of tines
  • High rotation speed
  • High reliability
  • Double cam drive
  • 2 central supports for tine bars
  • Big diameter driving sprocket

Intelligent Density 3D

• Electronic proportional density control
  • Hydraulic density control up to 2750 PSI
  • Tensioner arm with twin tension springs
  • As the bale grows, the pressure increases
• Density control from tractor cab
  • Full control over bale structure from tractor seat
  • 3 different zones adjustable in pressure and diameter + 0 PSI core
  • Zero pressure function also allows a soft center bale to be produced if required

ISOBUS Control

BV 5160 - Full ISOBUS Compatibility

• Simplicity – Efficiency – Productivity
  • Choose between Focus II(Mono) or IsoMatch Tellus (color touch-screen) terminal
  • Connect directly to an ISOBUS certified compatible tractor display in a few seconds
  • Very easy to use interface
• Full control on board
  • Bale diameter adjustment
  • Density adjustment in three zones
  • Current bale diameter (bale growing)
  • Left/Right driving indicator
  • Selection of twine or net binding
  • Adjustment of twine and net binding cycles Manual or automatic binding start
  • Total bale counter & 40 field counters
  • Selection of pick-up, drop floor & knives
  • Performance monitor (bales per hour)

Bale chamber

• Chamber design with reduced critical areas for crop build up in wet conditions
• Instant crop rotation
  • 3 rollers: 1 ribbed bottom, 2 Profiled fronts
  • 5 endless belts
  • 8.66” wide
  • Triple layer (0.31” thickness)
• Good bale start in all conditions
  • Two profiled rollers ensure instant bale rotation
  • High bale density due to immediate rolling and pressurizing