Outstanding flexibility : spread long or chop short with one machine. Bed loose housing and cubicles, as well as processing short straw for feed.
The 8250 is available in two variants, either mounted (8250M) or trailed (8250T).
The unique 8250 Dual Chop design for processing short material has been substantially updated with an increase in the speed of the chopping system to create a finer and more consistent chop length, designed specifically to suit the needs of TMR and Poultry/Cubicle bedding applications. The blade beam can be disengaged to allow material to be spread without chopping, or engaged at the push of a button for short chop mode.
The brand new ‘SYNCHRO’ WiFi control system enables the operator to:
Pause / Resume the flow of material at the touch of a button
Adjust bale restraint position to optimise output with straw / silage
Simplify operation by electronically synchronising bed chain speed and bale restraint position via a single control
Loading setting, to prevent contact between the bale and the crossbeater on startup
Manufactured using wear resistant steel the Hardox chute offers a longer service life.
Pause during processing
The Pause functionality can be used mid bale from the Synchro system. When paused, the bale is moved away from the cross beater and processing stops immediately.
Adjustable bale restraint
Variable position bale restraint (adjusted via WIFI control) ensures an even flow of material into the discharge fan.
Automatic bale hood
Bale hood raises automatically when machine is being loaded
3rd Generation Dual Chop System
A unique larger diameter crossbeater and a 40% larger open area at the screen.
Bale retention beam
The swinging bale retention beam on the tailgate can be adjusted between one loading and six operating positions.
Rear tailgate switch
Load bales without having to return to the tractor cab, ideal when removing netting or wrap.
Superior finish
Achieved through investment in the latest pre-paint preparation and double powder coat paint system. Nuts and bolts are either galvanised or stainless steel.
Stone trap
Stones and debris can quickly be removed from the drop down hatch at the rear of the machine.
Wider feed slide
An wider delivery slide improves delivery of material against a feed barrier.
Synchro System
Pre-programmed to suit high flow and lower flow applications like bedding for high flow and dispensing silage for lower flow.
Robust gear changer
High specification gear box with high/low fan speed gear pre-selection.
Centralised lubrication
A greasing bank and auto chain lubrication (optional on 8200) make routine maintenance easier.
Deliver only to the right hand side, with slightly greater blow distance than the swivel chute. Discharge height is lower for easier access to buildings. Chute can be raised or lowered as required.
HydroShield Dust Suppression
With its unique 5-point action, straw is sprayed with a high-pressure fine water mist reducing inhalable dust particles by 41%
Tailgate Extension
Increase capacity and ease of loading, attaches easily to a standard tailgate.
Hydraulic Filter
In-line high pressure filter stops contamination from damaging the valve equipment.
Clevis Drawbar and Jack
Where no pick up hitch is available a clevis drawbar and jack is available for straight forward hitching and unhitching.