Stock # E10389

Landpride RCR12 Series Rotary Cutters

In Stock

Location:
Topline Trailer and Equipment

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

RCR12 Series Rotary Cutters

The RCR1242, RCR1248, RCR1260 & RCR1272 Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.

Available Models: RCR1242, RCR1248, RCR1260, RCR1272

Features and Benefits

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Tractor HP range	20 - 50 HP
3 Year gearbox warranty	Shows our confidence in the gearbox integrity.
Cat. 3 driveline with shearbolt	Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch	Slip-clutch driveline offers convenience for continual work.
Floating top link	Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4” - 10” Cutting Height	Cutting height for wide range of cutting conditions.
Skid shoes (Accessory) RCR1260 & RCR1272 only	Provides sidewall reinforcement and helps protect bottom of sidewall.
1/2” x 3” Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper	Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed	Ensures clean cut.
Laminated tailwheel	Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel	1 1/4” spindle gives the strength to protect tailwheel assembly.
Rubber guarding	Protect against flying debris.
Metal Guarding	Protects against flying debris.

Quick-Hitch Compatible

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

Gearbox Warranty

3 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

1" Cutting Capacity

These cutters offers 1" cutting capacity. See Operator's Manual for more information.

Floating Top Link

Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.

Optional Skid Shoes

Optional skid shoes on the RCR1260 and RCR1272 models provide sidewall reinforcement and helps protect bottom of sidewall.

10 Gauge Stump Jumper

Allows cutter to slide over obstructions protecting the gearbox output shaft.

Specifications & Capacities

Model Numbers	RCR1242	RCR1248	RCR1260	RCR1272
Weight (With front & rear guard, shear bolt driveline & laminated tire)	383 lbs. (173.7 kg)	400 lbs. (181.4 kg)	478 lbs. (216.8 kg)	564 lbs. (255.8 kg)
Hitch	Category l (Quick hitch ready)
Cutting Width	42" (1.07 m)	48" (1.22 m)	60" (1.52 m)	72" (1.83 m)
Overall Width	45 1/4" (1.15 m)	53 5/8" (1.36 m)	64 1/4" (1.63 m)	76 1/2" (1.94 m)
Overall Length (Including Tailwheel)	83" (2.11 m)	89 1/8" (2.26 m)	97 3/4" (2.48 m)	110" (2.79 m)
Deck Height	7 1/4" (18.4 cm)
Cutting Height	1 1/4" - 10" (3.2cm. - 25.4 cm)
Cutting Capacity	Grass, weeds & light brush
Recommended Tractor Horsepower	18-40 hp (13.4-29.8 kw)	20-60 hp (14.9-44.7 kw)		25 -60 hp (18.6-44.7 kw)
Power Take-Off Speed	540 rpm
Gearbox Rating Horsepower	60 hp (44.7 kw)
Gearbox (Speed up beveled gears)	1:1.93 Speed-up Cast iron housing			1:1.47 Speed-up Cast iron housing
Gearbox Lubrication & Capacity	1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L) of gear lube 80-90W EP
Deck Construction	1 Piece reinforced deck			2 Piece reinforced deck
Deck Material Thickness	12 Gauge (2.7 mm)
Skids	12 Gauge (2.7 mm) (Formed in deck)		1/4" (6.35 mm) (Welded on deck)
Skid Shoes	Not Available		Bolt-on replaceable skid shoes (Sold separately through parts department only)
Stump Jumper	Round Pan 10 ga x 24" (61.0 cm)
Blades (2)	1/2" x 3" (13mm x 76 mm) Heat treated alloy steel Free-swinging blades
Blade Bolts	Keyed with harden flat washer and locknut
Blade Tip Speed	11,417 fpm (58.0 mps)	13,256 fpm (67.3 mps)	16,536 fpm (84.0 mps)	15,033 fpm (76.4 mps)
Driveline	ASAE Category 3
Driveline Protection Options	1/2" (13 mm) Center shear bolt protection or center bolt 2 plate slip clutch
Tailwheel	4" x 8" Laminated tire and yoke
Safety Guards	Rubber (standard front and rear)

Model

RCR1248, RCR1260, RCR1272

Category Name

Implements

Sale Type

Manufacturer

Landpride

2195038

Color

Orange,Tan

Hitch Types

Cat. 1 & Cat. 1 Limited

Kubota Matched

B Series | BX Series | L Series

Machine Widths

Horsepower Required

18-60 HP

Documents

Call for Price

Pricing excludes licensing and tax

Get a Quote Get Financed Value a Trade Contact Us View Pre-Owned Book a Demo Get Directions Get Directions Print

Monday	8:00 am - 5:00 pm
Tuesday	8:00 am - 5:00 pm
Wednesday	8:00 am - 5:00 pm
Thursday	8:00 am - 5:00 pm
Friday	8:00 am - 5:00 pm
Saturday	8:00AM - 12:00PM
Sunday	Closed